|
Mobile Billboard Manufacturing
 We specialize in custom fabrication of high quality mobile billboards. We manufacture 2 types of truck bodies, backlit and poster panel style. Each of these bodies can be installed on either a van cut-away (177” wheel base) or tilt-cab chassis (176” wheel base). Our Backlit units are perfect for lighting your message up after dark, while our poster panel bodies are an economical mobile advertising solution. Each body is manufactured to the highest quality standards of the industry. We also manufacture mobile billboard trailers. These units can be towed behind any mid-sized truck or SUV.
Aluminum Backlit Mobile Billboard Body: starting at $28,500 installed.
Click for Features
Standard features include:
- 9’ x 20’ displays
- Long life All aluminum construction
- Stainless steel mono-bolt rivets and hardware used throughout
- Formed ¼” steel extended frame rails with fish-plate webbing
- 1/8” 3003 Aluminum roof, front and rear sections
- Interlocking non-skid aluminum floor
- Aluminum rear access door with stainless hinges, T-latch, and door check
- Custom aluminum step bumper
- Body installed with 5/8” body tie U-bolts and hardwood frame spacers
- Front and rear of truck painted with automotive finish to match cab
- (3) 250 watt metal halide lights
- 1000 watt Xantrex inverter
- (2) Group 8D deep cycle batteries installed in commercial battery box
- Control panel for lights located inside of cab
- Battery separator wired to vehicle charging system
- Shore power inlet
- Quick-change J-hook banner installation system (change banners in as little as 30 minutes)
- Flush mounted LED lights
- DOT compliant conspicuity tape
- Mud flaps
Options include:
- Front and rear display frames
- Bose exterior sound system
- Live GPS tracking system
Poster Panel Body: starting at $25,000 installed.
Click for Features
Standard features include:
- 9’ x 20’ display
- Powder coated tubular steel sub-frame
- Stainless steel mono-bolt rivets and hardware used throughout
- Galvanized steel interlocking poster panel sides
- Formed ¼” steel extended frame rails with fish-plate webbing re-enforcement
- 1/8” 3003 Aluminum roof, front and rear sections
- Non-skid 1/8” diamond plate aluminum floor
- Aluminum rear access door with stainless hinges, T-latch, and door check
- Custom tubular steel rear bumper
- Front and rear of truck painted with automotive finish to match cab
- Quick-change J-hook banner installation system (change banners in as little as 30 minutes)
- Flush mounted LED lights
- 1/8” steel fenders and skirts
- Skirts painted black with urethane paint and stone guard on front of fenders and bumper
- Body installed with 5/8” body tie U-bolts and hardwood frame spacers
- DOT compliant conspicuity tape
- Mud flaps
Options include:
- Front and rear display frames
- Bose exterior sound system
- Live GPS tracking system
Backlit Mobile Billboard Trailer: starting at $15,000.
Click for Features
Standard features include:
- Steel Channel Frame
- Sand blasted
-
Epoxy primed
-
Powder coated black finish
-
Tandem Axle
-
Single braking axle (electric)
-
recessed marker and combination lights
-
2" ball
-
7K lb. Telescoping tongue jack
-
15" Aluminum wheels
-
1/8" Aluminum Tread Plate Decking with stainless steel monobolt rivets
-
8' 6" x 18' Display areas
-
All Aluminum Mobile Billboard Body
-
Front and rear of Body painted with automotive enamel
-
Stainless Steel hardware throughout
-
(2) Sign Brite 250 watt metal Halide light fixtures
-
Locking rear access door with stainless hinges and door check
-
Exclusive J-hook vinyl billboard tensioning system
-
economical banner production
-
draws banners drum tight leaving no wrinkles
-
5 - 1/2 HP 2300 watt Generator
-
10-hr run time at full fuel capacity
-
low oil shut-down
Options include:
- Battery bank with solar charging system
- GPS tracking
Backlit Billboard Unit for Pickup Truck: Call for pricing.
Click for Features
Standard features include:
- 6’ x 8’ displays
- Long life All aluminum construction
- Stainless steel mono-bolt rivets and hardware used throughout
- 1/8” 3003 Aluminum roof, front and rear sections
- Entire unit epoxy primed with powder coated finish
- 12 volt internal lighting
- Group 4D deep cycle batteries installed in commercial battery box
- Switch for lights located inside of cab
- Battery separator wired to vehicle charging system
- Shore power inlet
- Quick-change J-hook banner installation system (change banners in as little as 30 minutes)
- Flush mounted LED marker lights
- Diamond plate aluminum skirts
Options include:
- Front and rear display frames
- Live GPS tracking system
|
